Tennessee Department of Transportation (TDOT)
Nashville, TN – The Tennessee Department of Transportation (TDOT) in Montgomery County will be doing work consisting of bicycles and pedestrian facilities along U.S. 41A / SR 12.
Daily, 9:00am – 3:00pm, there will be sidewalk construction. The contractor is to utilize one lane of traffic for safety and construction. Day and night-time lane closures are possible.
Nightly, 6:00pm – 6:00am, there will be sidewalk construction. The contractor is to utilize one lane of traffic for safety and construction. Day and night-time lane closures are possible.
SR 13
There will be work consisting of the grading, drainage, construction of welded steel plate girder bridge, retaining wall, and paving on SR 149 and SR 13 from River Road to Zinc Plant Road. MM 17-19
Mayhew Road will remain closed. Traffic on SR-13 will remain in the phase 4 alignment as switched on 11/7/20. Traffic on SR-149 will be in the planned phase 4 alignment. Width reduced to 22′ for the entire project.
SR 236
There will be work consisting of the resurfacing of SR-236 from US 41A (SR-12) (LM 0.00) to SR-48 (Trenton Road) (LM 6.82), including joint repair and thin epoxy overlay.
Daily, 8:00am –3:30pm, there will be lane closures on both EB and WB for paving operations. One lane to remain open at all times.
Cheatham County
I-40
The sealing of I-40 from the Williamson County Line (LM 0.00) to the Davidson County Line (LM 7.15)
10/10 – 10/12, 9:00am – 3:00pm, there will be lane closures in both directions to apply a high-performance fog seal
Davidson County
I-24
The grading, drainage, construction of a retaining wall, signal traffic and paving on I-24 at the EB exit ramp to SR 254 (Bell Road, Exit 59)(LM 23.25 – LM 24.30)
Nightly, 8:00pm – 5:00am, there will be lane closures on I-24 EB and Bell Road, for construction activities.
The on-call concrete pavement repair at various locations on various Interstate and State Routes
10/10 – 10/12, 8:00pm – 5:00am, there will be a full ramp closure on I-24 W to Briley West ramp to saw, repair and seal concrete.
I-65
The on-call concrete pavement repair at various locations on various Interstate and State Routes
Nightly, (excluding weekends) 8:00pm – 5:00am, there will be full and partial ramp closures on I-65 SB at Armory Drive and on Armory Drive to I-65 SB on ramp, to saw damaged concrete.
The installation of an overhead sign structure on I-65
Daily, 9:00am – 3:00pm, there will be shoulder closures on I-65 SB for overhead sign footing installation. (mm 86)
I-65 & SR 245
The grading, drainage, construction of a retaining wall, signals and paving on I-65 at the NB exit ramp to SR 254 (OHB, Exit 74A)
Daily, 9:00am – 3:00pm there will be temporary lane closures on SR 254(OHB) in both directions for grading and signal work. Two lanes willl remain open in each direction.
I-40
The resurfacing on I-40 from near U.S. 70 (S.R. 24) (L.M. 9.61) to near 46th Avenue (L.M. 13.33).
The grading, drainage, signals, and paving on I-40 at the U.S. 70 (S.R. 24, Charlotte Pike) WB exit ramp (L.M. 9.65)
10/15, 7:00am – 7:00pm, The off ramp from I-40W to U.S. 70 (S.R. 24, Charlotte Pike) will be closed to mill and pave.
Davidson County / Rutherford County
I-24
The construction of an Intelligent Transportation System and upgrades from Nashville to Murfreesboro (Phase 2)
Nightly, 8:00pm – 5:00am, there will a be alternating lane closures and rolling road blocks to install overhead sign gantries from MM 60 to 70.
Dickson County / Williamson County
I-40
The resurfacing of I-40 from I-840 (LM 13.5 in Dickson County to the Cheatham County Line (LM 3.11) in Williamson County (MM 176 – 184)
Eastbound 7:00pm – 5:00am & Westbound 8:00pm – 6:00am, there will be a lane closures in both the EB and WB directions for milling and paving operations on I-40 from MM 176.5 to MM 184.3.
Dickson County / Williamson County / Cheatham County / Davidson County
The expansion of the SmartWay Intelligent Transportation System (ITS) on I-40 from near I-840 in Dickson County to near U.S. 70S (Exit 196) in Davidson County
Daily, 7:30am – 6:00pm, there will be temporary daytime shoulder closure for the drilling of the foundations for CCTV cameras at various locations throughout the project limits.
Robertson County
I-65
Grading, drainage, construction of bridges and retaining walls, ITS, and paving
Nightly, 8:00pm – 4:00am, there will be temporary lane closures on I-65 NB and SB for roadway and traffic control maintenance. One lane will remain open at all times.
Maintenance and Utilities
Davidson County – I-40
Milling and Paving
10/6, 7:00pm – 5:00am, work is being done at the I-24W and I-40W split at mm 211. Lanes 1 and 2 (lanes to I-40 W) to be closed for milling and paving operations.
Davidson County – I-24
Media Sign Inspections
10/8, 9:00am – 3:00pm, there will be lane closure on both EB and WB directions for Median Sign Inspections.
Davidson County – I-24
Repairing navigational Bridge lights on both sides
10/6, 8:00pm – 5:00am, there will be a lane closure on both EB and WB directions the shoulders will also be closed
Davidson County – I-40
Median Sign Inspections
10/9, 9:00am – 3:00pm, there will be lane closure on both EB and WB directions for Median Sign Inspections.
Robertson County – I-65
Cutting and trimming vegetation off of Roadway Signs
10/8, 6:00am – 11:00am, there will be lane closures for Cutting and trimming vegetation off of Roadway Signs at MM 108 – 109.
Tennessee Department of Transportation
Motorists are encouraged to use caution and obey reduced speed limits in all TDOT work zones, regardless of lane closure activity. Information in this report is provided to the Department of Transportation by the contractors. Most work is weather-dependent and subject to change due to inclement weather.
For more information on this or any other TDOT road construction project or to view travel conditions in this area visit the TDOT SmartWay Information System website ( www.tn.gov/tdot/tdotsmartway/ ).
People can also dial 511 from any landline or cellular phone to access up-to-date traffic conditions, or visit www.TN511.com ( http://www.tn511.com/ ). TDOT is also now on Twitter. For up-to-date traffic tweets for the Nashville area follow Nashville511 ( http://twitter.com/nashville511 ) on Twitter. For statewide traffic tweets just follow TN511 ( http://twitter.com/TN511 ).
Motorists are reminded to use all motorist information tools responsibly. Drivers should refrain from texting, tweeting, or using a mobile phone while operating a vehicle.
